add stm32mp157
This commit is contained in:
zibright
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,222 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32mp1xx.h
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS STM32MP1xx Device Peripheral Access Layer Header File.
|
||||
*
|
||||
* The file is the unique include file that the application programmer
|
||||
* is using in the C source code, usually in main.c. This file contains:
|
||||
* - Configuration section that allows to select:
|
||||
* - The STM32MP1xx device used in the target application
|
||||
* - To use or not the peripheral<61>s drivers in application code(i.e.
|
||||
* code will be based on direct access to peripheral<61>s registers
|
||||
* rather than drivers API), this option is controlled by
|
||||
* "#define USE_HAL_DRIVER"
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32mp1xx
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef __STM32MP1xx_H
|
||||
#define __STM32MP1xx_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/** @addtogroup Library_configuration_section
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Uncomment the line below according to the target STM32MP1 device used in your
|
||||
application
|
||||
*/
|
||||
|
||||
#if !defined (STM32MP1)
|
||||
#define STM32MP1
|
||||
#endif /* STM32MP1 */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to switch between these
|
||||
devices, you can define the device in your toolchain compiler preprocessor.
|
||||
*/
|
||||
#if !defined (USE_HAL_DRIVER)
|
||||
/**
|
||||
* @brief Comment the line below if you will not use the peripherals drivers.
|
||||
In this case, these drivers will not be included and the application code will
|
||||
be based on direct access to peripherals registers
|
||||
*/
|
||||
/*#define USE_HAL_DRIVER */
|
||||
#endif /* USE_HAL_DRIVER */
|
||||
|
||||
/**
|
||||
* @brief CMSIS Device version number
|
||||
*/
|
||||
#define __STM32MP1xx_CMSIS_VERSION_MAIN (0x01U) /*!< [31:24] main version */
|
||||
#define __STM32MP1xx_CMSIS_VERSION_SUB1 (0x07U) /*!< [23:16] sub1 version */
|
||||
#define __STM32MP1xx_CMSIS_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */
|
||||
#define __STM32MP1xx_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */
|
||||
#define __STM32MP1xx_CMSIS_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\
|
||||
|(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
|
||||
|(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
|
||||
|(__CMSIS_DEVICE_HAL_VERSION_RC))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup Device_Included
|
||||
* @{
|
||||
*/
|
||||
#if defined(CORE_CM4)
|
||||
#if defined(STM32MP15xx) /* keep for backward compatibility STM32MP15xx = STM32MP157Cxx */
|
||||
#include "stm32mp157cxx_cm4.h"
|
||||
#elif defined(STM32MP157Axx)
|
||||
#include "stm32mp157axx_cm4.h"
|
||||
#elif defined(STM32MP157Cxx)
|
||||
#include "stm32mp157cxx_cm4.h"
|
||||
#elif defined(STM32MP157Dxx)
|
||||
#include "stm32mp157dxx_cm4.h"
|
||||
#elif defined(STM32MP157Fxx)
|
||||
#include "stm32mp157fxx_cm4.h"
|
||||
#elif defined(STM32MP153Axx)
|
||||
#include "stm32mp153axx_cm4.h"
|
||||
#elif defined(STM32MP153Cxx)
|
||||
#include "stm32mp153cxx_cm4.h"
|
||||
#elif defined(STM32MP153Dxx)
|
||||
#include "stm32mp153dxx_cm4.h"
|
||||
#elif defined(STM32MP153Fxx)
|
||||
#include "stm32mp153fxx_cm4.h"
|
||||
#elif defined(STM32MP151Axx)
|
||||
#include "stm32mp151axx_cm4.h"
|
||||
#elif defined(STM32MP151Cxx)
|
||||
#include "stm32mp151cxx_cm4.h"
|
||||
#elif defined(STM32MP151Dxx)
|
||||
#include "stm32mp151dxx_cm4.h"
|
||||
#elif defined(STM32MP151Fxx)
|
||||
#include "stm32mp151fxx_cm4.h"
|
||||
#else
|
||||
#error "Please select first the target STM32MP1xx device used in your application (in stm32mp1xx.h file)"
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if defined(CORE_CA7)
|
||||
#if defined(STM32MP15xx) /* keep for backward compatibility STM32MP15xx = STM32MP157Cxx */
|
||||
#include "stm32mp157cxx_ca7.h"
|
||||
#elif defined(STM32MP157Axx)
|
||||
#include "stm32mp157axx_ca7.h"
|
||||
#elif defined(STM32MP157Cxx)
|
||||
#include "stm32mp157cxx_ca7.h"
|
||||
#elif defined(STM32MP157Dxx)
|
||||
#include "stm32mp157dxx_ca7.h"
|
||||
#elif defined(STM32MP157Fxx)
|
||||
#include "stm32mp157fxx_ca7.h"
|
||||
#elif defined(STM32MP153Axx)
|
||||
#include "stm32mp153axx_ca7.h"
|
||||
#elif defined(STM32MP153Cxx)
|
||||
#include "stm32mp153cxx_ca7.h"
|
||||
#elif defined(STM32MP153Dxx)
|
||||
#include "stm32mp153dxx_ca7.h"
|
||||
#elif defined(STM32MP153Fxx)
|
||||
#include "stm32mp153fxx_ca7.h"
|
||||
#elif defined(STM32MP151Axx)
|
||||
#include "stm32mp151axx_ca7.h"
|
||||
#elif defined(STM32MP151Cxx)
|
||||
#include "stm32mp151cxx_ca7.h"
|
||||
#elif defined(STM32MP151Dxx)
|
||||
#include "stm32mp151dxx_ca7.h"
|
||||
#elif defined(STM32MP151Fxx)
|
||||
#include "stm32mp151fxx_ca7.h"
|
||||
#else
|
||||
#error "Please select first the target STM32MP1xx device used in your application (in stm32mp1xx.h file)"
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup Exported_types
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
RESET = 0,
|
||||
SET = !RESET
|
||||
} FlagStatus, ITStatus;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
DISABLE = 0,
|
||||
ENABLE = !DISABLE
|
||||
} FunctionalState;
|
||||
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
|
||||
|
||||
typedef enum
|
||||
{
|
||||
ERROR = 0,
|
||||
SUCCESS = !ERROR
|
||||
} ErrorStatus;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup Exported_macros
|
||||
* @{
|
||||
*/
|
||||
#define SET_BIT(REG, BIT) ((REG) |= (BIT))
|
||||
|
||||
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
|
||||
|
||||
#define READ_BIT(REG, BIT) ((REG) & (BIT))
|
||||
|
||||
#define CLEAR_REG(REG) ((REG) = (0x0))
|
||||
|
||||
#define WRITE_REG(REG, VAL) ((REG) = (VAL))
|
||||
|
||||
#define READ_REG(REG) ((REG))
|
||||
|
||||
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
|
||||
|
||||
#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (USE_HAL_DRIVER)
|
||||
#include "stm32mp1xx_hal.h"
|
||||
#endif /* USE_HAL_DRIVER */
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif /* __cplusplus */
|
||||
|
||||
#endif /* __STM32MP1xx_H */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
@ -0,0 +1,104 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32mp1xx.h
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS Cortex-Mx Device System Source File for STM32MP1xx devices.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32mp1xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Define to prevent recursive inclusion
|
||||
*/
|
||||
#ifndef __SYSTEM_STM32MP1XX_H
|
||||
#define __SYSTEM_STM32MP1XX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
|
||||
/** @addtogroup STM32MP1xx_System_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup STM32MP1xx_System_Exported_types
|
||||
* @{
|
||||
*/
|
||||
/* This variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetSysClockFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
extern uint32_t SystemCoreClock; /*!< System Core1 Clock Frequency */
|
||||
extern uint32_t SystemCore1Clock; /*!< System Core1 Clock Frequency */
|
||||
extern uint32_t SystemCore2Clock; /*!< System Core2 Clock Frequency */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32MP1xx_System_Exported_Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32MP1xx_System_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32MP1xx_System_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
extern void SystemInit(void);
|
||||
extern void SystemCoreClockUpdate(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*__SYSTEM_STM32MP1XX_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
Reference in New Issue
Block a user